STEEL MESH

Welded steel wire mesh: 

Made from low carbon steel wire rods, which undergo a cold-rolling and straightening process, arranged vertically in proper spacing in the welding equipment both at line wires and cross wires, joint together by mean of electric resistance spot-welding (also directly welded with hot-rolled wire rods ), turning into steel fabric mesh sheets.

Properties of products:

Item  Hot-rolled  Hot-rolled  Cold-rolled
Tensile strength      Mpa>=   490  >=   570  >=   550  
Yield strength        Mpa  >= 335  >= 400  >= 500  
Elongation            %>= 16  >= 14  >=   8  
Designed strength     N / mm2300360360
Shearing force        N>= 150xAs  >= 150xAs  >= 150xAs  
Elasticity Value      N/mm2  2.0×10 5  2.0×10 5  2.0×10 5  

 Stands mesh:

Line wire diameter (nominal)     4.0-14.0  mm
Cross wire diameter (nominal)    4.0-14.0 mm
Line wire spacing  100 / 150 / 200 /250/ 300 /350/ 400 mm  
Cross wire spacing 100 / 150 / 200 / 300 / 400 mm

Other and larger cross wire spacing freely programmable

Wire mesh length            2000 – 6000 mm

Wire mesh width         2000 – 3300    mm

Non-Stands mesh:

Line wire diameter (nominal)            4.0 – 14.0  mm

Cross wire diameter (nominal)           4.0 – 14.0 mm

Line wire spacing           min.    100 mm

Wire mesh length:       2000 – 14000    mm

Wire mesh width:        1100 – 3300    mm

compliance with the  AS/NZS 4671:2001, BS4483, DIN488, SIA 16211, S 550 and NFA35-016.

Scope of application:

Welded mesh can be used in the multi-storey and high commercial building, airplane runway, road, and tunnel. Bridge, concrete pipes, water dame, dock, storage and sewage farm.